Zum™ Mesh Wireless J-Box Emergency Load Controller, 0-10 V Dimmer, 16 A, 100-277 V
Model: ZUMMESH-JBOX-16A-LV-EM
Part #: 6511350
- Zum™ wireless junction box-mounted lighting load controllers
- Pair and play wireless integration with Zum keypads, occupancy sensors, vacancy sensors, and daylight sensors
- Zum Mesh peer-to-peer RF communications for integration into a complete standalone or networked Zum wireless lighting control solution
- Dimming control of 0-10 V dimmable LED or fluorescent loads
- Dimmers rated 5 or 16 A at 100-277 VAC
A selection of junction box-mounted load controllers designed to provide intelligent lighting control as part of a complete Zum™ commercial room lighting system.
Crestron® Zum™ Mesh Wireless J-Box Load Controllers (ZUMMESH-JBOX Series) can provide 20 A switching, 5 A or 16 A 0-10 V dimming, and 20 A plug load control. J-Box load controllers mount directly to a 4 in. square junction box. Zum Mesh wireless technology affords easy pair and play integration as part of a complete Zum commercial lighting system. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, HVAC system integration, and centralized monitoring and management.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity allow for significant energy savings. To reduce energy usage, lights will turn off automatically when the room is vacant and dim gradually according to the amount of natural daylight in the room.
Pair and Play Setup
Pair and play functionality in Zum load controllers allows for installation in a room along with Zum keypads, occupancy or vacancy sensors, and/or a daylight sensor. Set up the room with a few button taps and instantly control the room lights without any additional programming. Room setup can be accomplished via the Zum app if the room is equipped with a Zum Network Bridge (sold separately).
Optional Zum Network Bridge
Snap a Zum Network Bridge (ZUMMESH-NETBRIDGE, sold separately) onto a Zum Wireless J-Box Load Controller for centralized lighting management via a Zum Floor Hub and Zum Net Wireless Gateway. The Zum Network Bridge enables enhanced room setup using the Zum app.
Optional Contact Closure Output
Snap a Zum Contact Closure Output (ZUMMESH-CCO, sold separately) onto the Zum Wireless J-Box Load Controller for integration with an HVAC system or other relay-controlled equipment.
Zum Mesh Wireless Technology
Zum Mesh wireless technology provides peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways.
- Zum™ wireless junction box-mounted lighting load controllers
- Pair and play wireless integration with Zum keypads, occupancy sensors, vacancy sensors, and daylight sensors
- Zum Mesh peer-to-peer RF communications for integration into a complete standalone or networked Zum wireless lighting control solution
- Dimming control of 0-10 V dimmable LED or fluorescent loads
- Dimmers rated 5 or 16 A at 100-277 VAC
- Zero cross switch control of 20 A, 100-277 V high inrush lighting loads
- Zero cross switch control of 20 A, 100-250 V plug loads
- Emergency lighting control meets UL® 924 standards
- Accommodation for a Zum Network Bridge or Zum Contact Closure Output device
- Flying lead wiring connections
- Knockout mount to a standard 4 in. square junction box
- UL 2043 listed for installation in an environmental air handling space
- Meets UL 916 standard for energy management equipment
- Meets CEC Title 24 and ASHRAE® 90.1 energy efficiency standards
- ICC® International Energy Conservation Code® compliant
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Wireless: Yes
- Warranty (Length/Type): 5 Years
- Regulatory Compliance: UL, IC, FCC, UL 916, UL 924, UL 2043, UL 94 5VA
- Depth: 1.34 in
- Height: 3.27 in
- Width: 4.17 in
- Product Weight: 0.44 lbs
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- DC Voltage: 10 Volts
- Standby Power: 1 Watt
- Load Control - Dimming (-LV) Models:
•Dimmable Load Types: 0-10 V LED drivers or fluorescent ballasts (4-wire), 60 mA maximum current sink
•Load Rating: ZUMMESH-JBOX-5A-LV: 5 A ZUMMESH-JBOX-16A-LV: 16 A - Load Control - Emergency (-EM) Model:
•Dimmable Load Types: 0-10 V LED drivers or fluorescent ballasts (4-wire), 60 mA maximum current sink
•Load Rating: 16 A
•Emergency Mode: All loads in the zone fully illuminate for ninety minutes or until normal power is restored (whichever comes first); Keypads are disabled; Sensors are disabled; The TEST button toggles the connected load on and off when pressed; Exits emergency mode when normal power is restored or after ninety minutes have passed; System communications return when normal power is restored - Power Requirements:
•Line/Load Voltage (-PLUG model only):125/250 VAC, 50/60 Hz, UL rating per UL 49 8; 100-250 VAC, 50/60 Hz, operating range - Wireless Communications:
•RF Transceiver: Z?m Mesh & Z?m Net 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant, AES-128 encryption
•Z?m Mesh Range: 50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities
•Z?m Net Range: 50 ft (15 m) to a Z?m Net wireless gateway or nearest Z?m Net mesh network device(s), requires the Z?m Network Bridge (model ZUMMESH-NETBRIDGE, sold separately), range between floors or ceilings is limited to one level, subject to site-specific conditions and individual device capabilities - Controls and Indicators:
•SETUP (1) Pushbutton and (1) red LED, used for room setup and factory reset
•TEST (1) Pushbutton and (1) green LED; Push to toggle the switched load output on and off; Press and hold to cycle the dimming level up and down; LED indicates that the load is turned on; LED lights and flashes during room setup and factory reset - Connections:
•Hot: (1) 14 AWG Class 1 flying lead; Black, line power input
•Neutral: (1) 14 AWG Class 1 flying lead; White, neutral
•0-10 V Dim +, 0-10 V Dim -, (-LV models only): (2) 18 AWG Class 1 flying leads; Purple, 0-10 VDC dimming control output, positive; Gray, 0-10 VDC dimming control output, negative
•Switched Load: (1) 14 AWG Class 1 flying lead; Red, switched load output
•Expansion Port: Accessory port for expansion accessory: ZUMMESH-NETBRIDGE: Provides Z?m Net wireless communications (sold separately); ZUMMESH-CCO: Provides contact closure input (sold separately) - Environmental:
•Humidity: 10% to 90% RH (noncondensing) - Construction:
•Housing: Plastic, white, UL 94 5VA flame rated
•Mounting: Mounts to the side of a 4 in. square junction box via a 1/2 in. conduit knockout; Meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space; To meet Chicago plenum requirements, install the J-box in a ZUMMESH-JBOX-FMKT-CP enclosure
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/