Zum Contact Closure Output
Model: ZUMMESH-CCO
Part #: 6508223
- Adds a contact closure output to a Zum™ commercial room lighting system
- Low-voltage SPDT form C relay activates and deactivates based on room occupancy and vacancy
- Rated 1A at 30VDC or 24VAC
- Enables integration with HVAC equipment to save energy
- Attaches to a Zum J-box load controller or Zum J-box accessory power supply
The Zum™ Contact Closure Output (ZUMMESH-CCO) adds a low-voltage SPDT form C contact closure to a Zum commercial room lighting control system to enable integration with an HVAC system or other equipment. The contact closure is controlled by the occupancy or vacancy sensors in the room. When the room is occupied, the relay engages. When the room is vacant, the relay disengages.
The ZUMMESH-CCO is a small module that snaps onto a Zum J-Box Load Controller or Zum J-Box accessory power supply (ZUMMESH-JBOX or ZUMMESH-JBOX-PSU). The Zum J-Box device provides power and wireless communications for the ZUMMESH-CCO.
- Adds a contact closure output to a Zum™ commercial room lighting system
- Low-voltage SPDT form C relay activates and deactivates based on room occupancy and vacancy
- Rated 1A at 30VDC or 24VAC
- Enables integration with HVAC equipment to save energy
- Attaches to a Zum J-box load controller or Zum J-box accessory power supply
- UL® 2043 listed for installation in an environmental air handling space
- Meets UL 916 standard for energy management equipment
- Meets CEC Title 24 energy efficiency standards
- Meets ASHRAE® 90.1 energy efficiency standards
- ICC® International Energy Conservation Code® compliant
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage: 24 Volts
- Current Draw: 1 Amps
- DC Voltage: 30 Volts
- Depth: 1.01 in
- Height: 1.66 in
- Width: 1.94 in
- Product Weight: 0.19 lbs
- Wireless Communications:
•Zum Net: (Refer to the host J-Box device) - Connectors:
•N.O., COM, N.C.: (1) 3-pin 3.5mm detachable terminal block
•Low-voltage SPDT form C contact closure
•For use with Class 2 wiring only - Indicators:
•Status: (1) Green LED, indicates contact closure status - Power Requirements:
•3.3VDC, provided by a Zum J-box load controller or Zum J-box accessory power supply - Environmental:
•Humidity: 10% to 90% RH (non-condensing) - Construction:
•Housing: Plastic, white, UL 94 5VA flame rated
•Mounting: Attaches to a Zum J-box load controller or Zum J-box accessory power supply, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/