Box-mounted Zum J-Box Zone Controller, 0 to 10V, 16A
Model: ZUMMESH-JBOX-16A-LV
Part #: 6507911
- Zum™ junction box-mounted lighting zone control
- Zum mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Wireless integration with Zum keypads, occupancy sensors, vacancy sensors, and daylight sensors
- Real-time energy monitoring when connected with a Zum Hub and Zum network bridge
Zum™ junction box-mounted zone controller for intelligent lighting system control based on the occupancy, vacancy, and available natural light in any room.
The Zum™ junction box-mounted zone controllers deliver intelligent pair and play room lighting control with essential features for energy efficiency. Available for 16A switching, 5A or 16A 0-10V dimming, and 20A plug load control, each ZUMMESH-JBOX model wirelessly connects to Zum daylight sensors, occupancy sensors, vacancy sensors, keypads, and dimmers over the Zum Mesh network, providing intelligent lighting control based on the amount of natural light and the presence of people in a space. The Zum J-box zone controllers offer a powerful lighting control solution for every space within the Zum network.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity drive the potential for significant energy savings. Lights will turn off automatically when the room is vacant, and artificial lighting in rooms with natural daylight will dim automatically, reducing energy usage while maintaining a consistent light level for a comfortable workspace.
Zum Mesh Wireless Technology
Ultra-reliable Zum Mesh wireless technology provides steadfast peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Employing a Wi-Fi® friendly 2.4GHz peer-to-peer mesh network topology, nearly every Zum Mesh device acts as an expander, relaying wireless commands directly between Zum Mesh devices to ensure that every command reaches its intended destination without disruption. Zum Mesh is smart. Every Zum Mesh device knows its purpose and just the right messages to communicate to other Zum Mesh devices within the space. Each Zum Mesh device that is added to space effectively increases the range and stability of the peer-to-peer mesh network by providing multiple redundant signal paths. Each Zum Mesh device auto-negotiates its RF channel to provide robust communication and is protected through AES 128-bit encryption. The wireless range between any two Zum Mesh devices is typically up to 50ft (15m) indoors.
Standalone System Capabilities
Zum J-box zone controllers also function as a standalone lighting system for Zum occupancy sensors.
- Zum™ junction box-mounted lighting zone control
- Zum mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Wireless integration with Zum keypads, occupancy sensors, vacancy sensors, and daylight sensors
- Real-time energy monitoring when connected with a Zum Hub and Zum network bridge
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 20 Amps
- DC Voltage: 3.30 Volts
- Depth: 1.31 in
- Height: 3.25 in
- Width: 4.17 in
- Product Weight: 1.50 lbs
- Color: White
- Load Ratings:
•Dim Load Types: 0-10V LED driver (4-wire), 60mA maximum current sink - Wireless Communications:
•RF Transceiver: 2-way RF, 2.4GHz ISM Channels 11-26 (2400 to 2483.5MHz), default channel 15, IEEE 802.15.4 compliant
•Zum™ Mesh Range (Typical): 50' (46m) indoor to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities - Controls and Indicators:
•SETUP: (1) Pushbutton for entering Setup mode, (1) Red LED, indicates unit is in Setup mode
•TEST: (1) Pushbutton for entering Test mode, (1) Green LED, indicates unit is in Test mode - Connections:
•Hot: (1) 14 AWG Class 1 flying lead, black
•NEUT: (1) 14 AWG Class 1 flying lead, white
•Zum™: (1) Zum port, for connection to Zum Network Bridge only
•SW HOT: (1) 14 AWG Class 1 flying lead, red - Enclosure:
•Housing: Plastic, white
•Mounting: Mounts in a 4" x 4" junction box via 1/2" conduit knockout, rated for mounting in plenum spaces
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/