Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Binary™ Single Coax HDMI Extender (400') Plus IR Receiver & Flasher Pass Through
Series: Binary™
Model: B-400-1COAX-HDIR
- HDMI® (with 3D)
- Engineered by SnapAV
- Bi-Directional IR
- Screw Down Power Plug
- Built-In ESD and Surge Protection
Product Info
Tech Specs
Documents
The Binary™ 1COAX extender gives you the ability to send HDMI and IR control signals over the existing coax infrastructure. This system is completely resistant to EMI and ESD while delivering 1080p high definition up to 400 feet away. Existing analog TV installations with coaxial cable can now be easily retrofitted to HDMI distribution systems using the B-400-1COAX-HDIR. High-def HDMI signals are delivered up to 400' at full 1080p 60Hz resolution.* At up to 3X the distance, this extender is the ideal problem solver for long-distance residential and commercial HDMI applications. Under the hood of the B-400-1COAX-HDIR is an engineer’s paradise! These surface-mount, high speed circuits are built on a multi-layer board to give you an “over coax” solution that is specifically designed for custom install applications. Sure you have a number of supplier choices when it comes to HDMI products – but do they offer full HDCP compliance, EDID learning, bi-directional IR, and locking power connectors? "Engineered by SnapAV" – it’s not just a saying, it’s what we do. In some applications, conventional unshielded twisted pair can be susceptible to interference from fans, microwaves and other devices that emit RF noise. Coaxial wire is fully shielded with a metal braid and foil so it is more resistant to EMI. During development, every connection was tortured with an ESD gun and a lightning simulator. They were hit with ESD at 15KV and surges up to 2500V. More important, though, they each lived to tell about it! Over the same coax wire, you can easily control DVD players, cable boxes and other source equipment from the TV location. If an automation or remote system is being used, an adapter cable is included to allow control of the TV from the equipment at the head-end. For best performance, use our Episode® IR flashers and receivers. A bi-color status LED on the TX and RX units indicate if the unit is receiving power and signal - great for troubleshooting! We've even included a locking power connector to secure power to the unit. No more worries about the customer calling because the power came unplugged! An EDID learning mode ensures the TV and source will always be in sync and operating at the highest resolution.
- HDMI® (with 3D)
- Engineered by SnapAV
- Bi-Directional IR
- Screw Down Power Plug
- Built-In ESD and Surge Protection
- Extender Type - HDMI
- Warranty - Yes
- ROHS Compliant - Yes
- Certifications: CE, FCC
- ROHS Compliant: Yes
- Active Power: 6 Watt
- Current Draw: 4 Amps
- DC Voltage: 5 Volts
- Depth: 3 in
- Height: 1.20 in
- Width: 3 in
- Product Weight: 1.40 lbs
- Color: Black
- Regulatory Compliance: FCC, RoHS
- Warranty (Length/Type): 2 Year Limited
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 400 ft
Binary™ Single Coax HDMI Extender
626 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Gable
close
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
www.gablecompany.com
Contact in regards to this product:
Snap One
Model: B-400-1COAX-HDIR
Request more information from a dealer near you
close
Request more information from a dealer near you