Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2-channel Wireless RF Receiver
Series: AD
Model: AD4D
- Wide tuning range up to 184MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® and ShurePlus™ Channels app
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
Product Info
Tech Specs
Related Products
Documents
Other Options
The AD4D Axient Digital Dual Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.
- Wide tuning range up to 184MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® and ShurePlus™ Channels app
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
- AES3 output
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- Optional DC module available to support redundant power
- Wireless Receiver Transmission - RF
- Wireless - Yes
- Spec Sheet available - Yes
- Depth: 13.10 in
- Height: 1.70 in
- Product Weight: 10.10 lbs
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 0.26 Amps
- Width: 19 in
- Housing: Steel, Extruded aluminum
- Thermal Dissipation: Maximum: 23 W (78 BTU/hr), Idle: 15 W (52 BTU/hr)
- Audio Output:
•Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
•Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
•Impedance: 100-ohm
•Full Scale Output: 1/4" (6.35 mm): +8 dBV XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
•Mic/Line Switch: 30dB pad
•Phantom Power Protection: Yes - NETWORKING:
•Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
•Network Addressing Capability: DHCP or Manual IP address
•Maximum Ethernet Cable Length: 100 m (328 ft) - Cascade output:
•Connector Type: BNC
•Note: For connection of one additional receiver in the same band
•Configuration: Unbalanced, passive
•Impedance: 50-ohm
•Insertion Loss: 0dB, typical - RF Input:
•Spurious Rejection: >80dB, typical
•Connector Type: BNC
•Impedance: 50-ohm
•Bias Voltage 12 to 13.5VDC, 150mA maximum, per antenna, switchable on/off
•RF Carrier Frequency Range
•AD4D=A: 470-636MHz
•AD4D=B: 606-810MHz
•AD4D=C: 750-960MHz - Number of Channels: 2
AD3=-G57
- 470 to 616 MHz Axient Digital Plug-On Wireless Transmitter
AD3=-K54
- 606 to 663 MHz Axient Digital Plug-On Wireless Transmitter
AD3=-X55
- 941 to 960 MHz Axient Digital Plug-On Wireless Transmitter
Axient Digital
- Wireless Digital Audio System
Transmitter/Receiver
872074 kb
- Data Sheet
by
Shure Incorporated
Model: AD4D-DC=-A
by
Shure Incorporated
Model: AD4D-DC=-B
by
Shure Incorporated
Model: AD4D-DC=-C
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Gable
close
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
www.gablecompany.com
Contact in regards to this product:
Shure Incorporated
Model: AD4D
Request more information from a dealer near you
close
Request more information from a dealer near you