Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
15 Inch Low Frequency Transducer, 16 Ohms Impedance
Model: 2226J
- 600 W AES continuous pink noise power capacity
- 100 mm (4 in) edgewound aluminum ribbon voice coil
- 30 Hz-2.5 kHz response
- 97 dB sensitivity, 1 W, 1 m (3.3 ft)
- SFG magnet structure with Vented Gap Cooling’” technology
Product Info
Tech Specs
Related Products
Documents
The 2226G/H/J low frequency transducer represents the results of JBL’s latest engineering research in high power transducer design. The 2226G/H/J signifies a major advance in speaker design by incorporating JBL’s patented Vented Gap Cooling’” technology in an improved Symmetrical Field Geometry (SFG) magnetic structure. To increase power handling while reducing power compression, JBL engineers have created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature - a direct improvement in power compression. The 2226G/H/J incorporates an improved SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis has allowed JBL engineers to optimize both magnet weight and flux density so that the 2226G/H/J is not only 1.5 kg (3.25 lb) lighter than its predecessor, but has reduced distortion as well. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost.
- 600 W AES continuous pink noise power capacity
- 100 mm (4 in) edgewound aluminum ribbon voice coil
- 30 Hz-2.5 kHz response
- 97 dB sensitivity, 1 W, 1 m (3.3 ft)
- SFG magnet structure with Vented Gap Cooling’” technology
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 15 in
- Maximum Frequency Response (Bandwidth): 2.50 kHz
- Maximum Frequency Response (Bandwidth): 2500 Hz
- Minimum Frequency Response (Bandwidth): 30 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Impedance: 8 ohm
- Power Handling: 600 Watt
- Sensitivity: 97 dB
- Product Weight: 19.18 lbs
2226H
- 15 Inch Low Frequency Transducer, 8 Ohms Impedance
Specification Sheet for 380 mm (15 in) Low Frequency Transducer
2011 kb
- Data Sheet
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Gable
close
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/
Contact in regards to this product:
JBL Professional
Model: 2226J
Request more information from a dealer near you
close
Request more information from a dealer near you