J-Box Integration Module with Standalone Timeclock for Zum Lighting Control
Model: ZUMLINK-JBOX-IO
- Zum® wired junctionbox mounted multi-purpose integration and timeclock device
- Powered by Zum linkbus
- Provides a standaloneastronomical time clock and local time and date settings without a ZUM-HUB4 orcontrol system
- Provides adistributed, room level interface to third-party smart controllers, such asHVAC/VAV systems and shade controllers
- Supports in-roomdevice daisy chaining with other Zum wired devices
The ZUMLINK-JBOX-IO is a compact, multi-purpose, standalone integration and timeclock device that applies schedules, events, and common integration protocols to a Zum space without the need for a control system. As a Zum Wired device, the ZUMLINK-JBOX-IO can be discovered by the Zum app for easy configuration without custom programming. If needed, the ZUMLINK-JBOX-IO can also connect to a Crestron control system. The ZUMLINK-JBOX-IO mounts to a standard 4 in. square junction box, provides two Zum Link serial bus RJ-45 ports, an RS-232 port, an RS-485 port, two dry contact closure outputs, two low-voltage inputs, and two low-voltage inputs with LED indicator light support. The ZUMLINK-JBOX-IO supports in-room device daisy chaining to any 24VDC Zum Link run.
Zum Link Wired Technology
Zum Link technology enables in-room lighting control through keypads and sensors wired to controllers. Zum Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold separately) to RJ-45 ports to provide simple daisy-chaining and lighting control of compatible loads. The Zum Wired devices work together in a local ecosystem to provide customized solutions using the Zum app.
Easy Installation
The ZUMLINK-JBOX-IO installs in a standard four-inch square junction box. Depending on the installation requirements of the space, the ZUMLINK-JBOX-IO can be installed with the connections facing out or into the junction box. Connect the ZUMLINK-JBOX-IO to Zum devices (load controllers, keypads, and sensors) utilizing Zum Link connections.
Astronomical Time-Clock Control
Enables control of standalone Zum spaces based on date and time without the need for system networking or a centralized control hub. Configure date and time, schedules, events, and holidays from the Zum app directly to the space.
- Zum® wired junctionbox mounted multi-purpose integration and timeclock device
- Powered by Zum linkbus
- Provides a standaloneastronomical time clock and local time and date settings without a ZUM-HUB4 orcontrol system
- Provides adistributed, room level interface to third-party smart controllers, such asHVAC/VAV systems and shade controllers
- Supports in-roomdevice daisy chaining with other Zum wired devices
- Cover mount to a standard 4 in. square junction box
- Systems Controlled - Lighting
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: cUL, FCC, IC, UL
- Depth: 0.99 in
- Height: 4.16 in
- Width: 4.16 in
- Product Weight: 0.38 lbs
- Color: White
- Zum Link Power Bus Requirements:
•Max Current Consumption: 110Ma
•Max Keypad Feedback LED Current: 20mA, Passthrough from Zum Link bus - Wired Communications:
•ZUMLINK: (2) RJ-45 ports; In-room Zum Link device daisy-chaining - Controls and Indicators:
•SETUP: (2) Pushbutton and (1) green LED; Indicates On/Off status of connected load; Lights briefly to indicate a button press
•PWR: (2) Bi-color LED; Power indicator; Turns red when power is first applied for approximately 0.5 seconds and then turns green
•ZUMLINK: (2) Green LED; LED lights green in normal operation
•CLOCK: (2) Green LED indicates when: A unit is part of a Zum Link network; The time and location have been set; One or more timeclock events have been configured; The LED blinks for 0.5 seconds on/off when timeclock is in manual or maintained override - Connections:
•C, NO, NC RELAY: (2) 3-pin terminal blocks for output relays; 30VAC/VDC 1A; Each terminal accepts one 20-24 AWG wire
•V+, IN, LED IN: (2) 3-pin terminal blocks for input relays with keyswitch LED support: Each terminal accepts one 20-24 AWG wire
•V+, N IN: (2) 2-pin terminal blocks for input relays without keyswitch support; Each terminal accepts one 20-24 AWG wire
•RS-232 COM1: (1) 5-pin terminals block; G, TX, RX, RTS, CTS; Each terminal accepts one 20-24 AWG wire
•RS-485 COM2: (1) 3-pin terminal block; G, D+, D-; Each terminal accepts one 20-24 AWG wire - Humidity: 10% to 90% RH (noncondensing)
- Heat Dissipation: 6 BTU/hr
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
www.gablecompany.com