4K 4x1 Scaling Auto-Switcher and DM Lite European and UK Wall Plate Extender, Black, over CATx Cable
Model: HDI-MD-4K-400-2G-B KIT
Part #: 6511426
- Two HDMI® inputs and one VGA input on transmitter and an additional HDMI input on receiver
- One 4K scaling HDMI output on receiver
- Automatic switching of inputs
- Signal extension of video, audio, and power over a CATx cable—up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
- EDID management
The Crestron® HDI-MD-4K-400-2G provides a cost-effective multimedia presentation solution for classrooms and meeting spaces. Consisting of a European and U.K. wall plate transmitter (HDI-TX-301-C-2G-E Series) and a surface-mountable receiver (HD-RX-4K-210-C-E), the HDI-MD-4K-400-2G extends an HDMI® or VGA signal over a CATx (CAT5e or higher) twisted pair cable. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).
The transmitter provides two HDMI inputs and one VGA input with a complementary stereo analog audio input. The receiver provides an additional HDMI input that can be connected to a local AV source or to an optional Crestron media presentation wall plate (MPI-WP150 Series, sold separately).
Automatic Switching of Inputs
Automatic switching among the HDMI and VGA inputs on the transmitter and the HDMI input on the receiver can occur based on the last connected input or on the routing priority assigned to each input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition to automatic switching, input selection push buttons on the transmitter and receiver enable the desired input to be selected manually.
4K60 4:2:0 capability
2-gang European and U.K. wall plate transmitter and surface-mountable receiver with 4x1 AV switching, scaling, and signal extension functionality.
- Two HDMI® inputs and one VGA input on transmitter and an additional HDMI input on receiver
- One 4K scaling HDMI output on receiver
- Automatic switching of inputs
- Signal extension of video, audio, and power over a CATx cable—up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
- EDID management
- HDCP management
- Stereo audio de-embedding via the analog audio output
- IR, RS-232, relay, and I/O control ports
- CEC (Consumer Electronics Control) capability
- Gigabit Ethernet connectivity
- Convenience Ethernet port
- Built-in web interface for easy configuration and monitoring
- Compatibility with Crestron® 3-Series® or later control systems
- .AV Framework™ technology support
- XiO Cloud® service support
- Native integration with Cisco Webex® and Touch 10 devices
- Low-profile installation
- Black wall plate transmitter (decorator style faceplate sold separately)
- 100-240 VAC power pack included
- Extender Type - HDMI
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, IC, FCC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 1.25 Amps
- DC Voltage: 24 Volts
- Color: Black
- Video:
•Switcher: 4x1 (3 inputs at transmitter plus 1 input at receiver x 1 output at receiver) auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technology
•Scaler, HDMI Output: 4K video scaler with intelligent frame rate conversion, Deep Color support, content adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
•Input Signal Types: HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface compatible2); VGA/RGB (RGBHV, RGBS, RGsB), component (YPbPr)
•Output Signal Types: HDMI with Deep Color and 4K (DVI compatible4)
•Copy Protection: Transmitter: HDCP 1.4
•Receiver: HDCP 2.2 - Audio:
•Input Signal Types: HDMI (Dual-Mode DisplayPort interface compatible2), analog stereo
•Output Signal Types: HDMI, analog stereo
•Digital Formats: 2-channel LPCM
•Analog Formats: Stereo 2-channel
•Analog-To-Digital Conversion: 24-bit 48 kHz
•Digital-To-Analog Conversion: 24-bit 48 kHz
•Output Impedance: 200 ohms balanced, 100 ohms unbalanced
•Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
•Output Volume: -80 to +20 dB level adjustment range, plus Mute
•Mute: Enable or disable independently for HDMI and analog audio output
•Analog Input Performance: Frequency Response: 20 Hz to 20 kHz ±0.75 dB; S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted; THD+N: <0.006% at 1 kHz; Stereo Separation: >80 dB
•Analog Output Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB; S/N Ratio: >95 dB at 10 dBV, 20 Hz to 20 kHz, A-weighted
•THD+N: <0.005% at 1 kHz and 10 dBV
•Stereo Separation: 20 Hz to 20 kHz 80 dB
•Acoustic Noise: Not applicable (fanless) - COMMUNICATIONS:
•Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, CIP, DHCP, web browser setup and control
•RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
•IR: 1-way device control via infrared up to 60 kHz
•HDMI: Transmitter: HDCP 1.4, EDID Receiver: HDCP 2.2, EDID, CEC
•DM Lite: HDCP 2.2, EDID
•Connectors - Transmitter (HDI-TX-301-C-2G-E)
•HDMI IN 1 - 2: (2) HDMI Type A connectors, female; HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort interface compatible2)
•VGA IN: (1) HD15 connector, female; RGB (VGA) or component video input3; Formats: RGBHV, RGBS, RGsB, YPbPr
•AUDIO IN: (1) 3.5 mm TRS mini phone jack; Unbalanced stereo line-level audio input; Maximum Input Level: 2 Vrms; Input Impedance: 44k Ohms
•Ethernet (Front): (1) 8-pin RJ-45 connector, female; Passive pass-through to the rear panel Ethernet port (refer to the "Ethernet Pass- Through (Rear)" specifications below for additional information)
•Ethernet Pass-Through (Rear): (1) 8-pin RJ-45 connector, female; Passive pass-through to the front panel Ethernet port; Compatible Cable Standards: CAT5e, CAT6, CAT6a; Low Level Contact Resistance: 100 mOHMS maximum; Insulation Resistance: 500 mOHMS minimum at 500 VDC; Dielectric Withstanding Voltage: 1000 VAC between contacts and shell; Voltage Rating: 125 VAC; Current Rating: 1.5 A; PoE Compatibility: IEEE 802.3at PoE and PoE+; Insertion Force: 22 N maximum; Retention Force: 76 N minimum
•24 VDC 1.25A (Rear): (2) Captive screw terminals; TO RX (DM Lite, Rear): (1) 8-pin RJ-45 connector, female, shielded; DM Lite® link port for connection to the HD-RX-4K-210-C-E receiver - Connectors - Receiver (HD-RX-4K-210-C-E) :
•HDMI INPUT 1: (1) HDMI Type A connector, female;HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible2)
•DM Lite INPUT 2: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite link port for connection to the HDI-TX-301-C-2G-E transmitter
•HDMI OUTPUT: (1) HDMI Type A connector, female; HDMI digital video/audio output (DVI compatible4)
•AUDIO L/R: (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced; Output Impedance: 200 ohms balanced, 100 ohms unbalanced
•Ethernet: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port
•I/O 1-2: (2) 2-pin detachable terminal blocks; Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold >3.125 V low/0 and <1.875 V high/1; Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads; Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled; Programmable 5 V, 2k ohms pull-up resistor per pin
•RELAY 1-2: (2) 2-pin detachable terminal blocks; Comprised of 2 normally open, isolated relays; Rated 1 A, 30 VAC/VDC; MOV arc suppression across contacts
•IR: (1) 2-pin 3.5 mm detachable terminal block; IR output control port; Supports IR up to 60 kHz; IRP2 emitter sold separately
•COM: (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Supports RS-232 up to 115.2k baud with hardware and software handshaking
•24VDC 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW-2412WU power pack included
•SERVICE: (1) USB Type A connector, female; For factory use only - Controls and Indicators - Transmitter (HDI-TX-301-C-2G-E) :
•PWR: (1) LED, indicates that power is being applied to the HDI-TX-301-C-2G-E from the power pack connected to the receiver. Amber indicates that the HDI-TX-301-C-2G-E is booting. Green indicates that the HDI-TX-301-C-2G-E is operational.
•HDMI IN 1 - 2: (2) Bi-color green/amber LEDs, indicate input selection and signal presence for the corresponding HDMI input
•INPUT SEL: (1) Push button for manual input selection, cycles through all available inputs on both the transmitter and receiver
•VGA IN: (1) Bi-color green/amber LED, indicates input selection and signal presence for the VGA input
•AUTO: (1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled
•SETUP: (1) Red LED and (1) recessed push button for Ethernet setup
•RESET: (1) Push button for hardware reset of both the transmitter and the HD-RX-4K-210-C-E receiver
•LINK: (1) Green LED, indicates DM Lite link status
•TO RX (Rear): (2) LEDs on RJ-45 connector. Green indicates DM Lite link status. Amber LED indicates a valid video signal
•Controls and Indicators - Receiver (HD-RX-4K-210-C-E)
•PWR: (1) LED, indicates that power is being applied to the HD-RX-4K-210-C-E from the power pack connected to the receiver. Amber indicates that the HD-RX-4K-210-C-E is booting. Green indicates that the HD-RX-4K-210-C-E is operational
•INPUT 1 - 2: (2) Push buttons for manual input selection and (2) LEDs. Green indicates that video is switched. Amber indicates that video is detected but is not switched
•AUTO: (1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled
•SETUP: (1) Red LED and (1) push button for display of IP address on the HDMI output
•DM Lite: (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video.
•Ethernet: (2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is established. Flashing amber indicates Ethernet activity - Humidity: Transmitter: 20% to 90% RH (non-condensing); Receiver: 10% to 90% RH (non-condensing)
- Heat Dissipation: 63.1 BTU/hr
- Construction - Transmitter (HDI-TX-301-C-2G-E) :
•Composition: Metal housing and bracket with black polycarbonate front label overlay
•Mounting: Mounts in a 2-gang, 45 mm (1-25/32 inch) deep U.K. or European electrical box (not included)
•Faceplate: Requires a FP2 INTENSE VERT or FP2 PURE VERT Series faceplate (sold separately) - Enclosure - Receiver (HD-RX-4K-210-C-E) :
•Chassis: Metal, black finish, vented sides, 2 mounting flanges attached
•Mounting: Surface or rack rail mount - Dimensions - Transmitter (HDI-TX-301-C-2G-E) :
•Height: 73 mm (2.88 in.)
•Width: 132.5 mm (5.22 in.)
•Depth: 44 mm (1.74 in.) - Dimensions - Receiver (HD-RX-4K-210-C-E) :
•Height: 5.11 in. (130 mm)
•Width: 10.53 in. (268 mm) with mounting flanges attached
•Depth: 1.10 in. (28 mm) - WEIGHT:
•Transmitter: 375 g (13.23 oz)
•Receiver: 2.3 lb (1.05 kg)
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/