Battery-powered Photosensor with infiNET EX, Dual-loop
Model: GLS-LDL-EX-BATT
Part #: 6507060
- Dual-loop, battery-powered photosensor
- Ceiling or surface mounting
- infiNET EX® communications for easy integration into a complete wireless lighting control solution
- Measures light level from natural daylight and ambient light sources
- 10-year battery life via two Lithium-ion AAA batteries
Versatile Mounting
The battery-powered GLS-LDL-EX-BATT photosensor can be mounted in a variety of places due to its wireless design. The sensor can be mounted to drywall with an anchor and screw, to a drop ceiling or lighting fixture with a magnetic strip, or in a temporary location with adhesive tape. For ceiling mounts, the entire photosensor snaps into a mounting plate that can rotate up to 40 degrees after being secured in place, allowing its position to be fine-tuned after installation. The GLS-LDL-EX-BATT is a sleepy device that will not communicate with infiNET EX® technology unless a certain time or light threshold has been achieved. This ensures that the sensor does not draw on power unnecessarily and that the battery has a long lifespan.
infiNET EXUltra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.
- Dual-loop, battery-powered photosensor
- Ceiling or surface mounting
- infiNET EX® communications for easy integration into a complete wireless lighting control solution
- Measures light level from natural daylight and ambient light sources
- 10-year battery life via two Lithium-ion AAA batteries
- Local button lets users easily commission and calibrate the daylight harvesting system
- Visible LED to indicate sensor status
- Sleepy device
- Sleek, compact design
- Paintable housing
- Sensor Type - Other
- Systems Controlled - Lighting
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Height: 0.99 in
- Product Weight: 0.08 lbs
- Color: White
- Certifications: FCC, CE
- Warranty (Length/Type): 3 Years Limited
- Sensing:
- Light Sensitivity: 0-65535 lux (0-6089 foot-candles), applies to both open- and closed-loop sensing
- Wireless:
- RF Transceiver: infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
- Range (Typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); Subject to site-specific conditions and individual device capabilities [1]
- Gateway: Requires an infiNET EX gateway[2]
- Controls & Indicators:
- (1) Pushbutton on front of device for acquire and touch-settable ID (TSID) functions and for adjusting sensitivity
- (1) LED, green and red, indicates closed loop sensing and status during the acquiring process
- Environmental: Humidity: 0% to 95% RH (non-condensing)
- Power Requirements:
- (2) AAA Lithium-ion batteries;
- 10 year battery life (under normal operating conditions);
- Batteries ship with sensor
- Enclosure:
-
Housing : Plastic, white textured finish, with metal base
- Mounting:
- Mounts to a ceiling mounting plate;
- Mounts in a ~3-1/2 in (88 mm) diameter hole created by the provided cutout template;
- Includes mounting screws and integral toggle clamps
- Mounting:
- Notes:
- 1. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices, including the GLS-LDL-EX-BATT, do not provide expander functionality. Wireless networks composed predominantly of battery-powered devices may need additional infiNET EX expanders, such as the CLW-EXPEX or GLA-EXPEX (sold separately), or other non-battery-powered infiNET EX devices to ensure proper functionality of the network and battery life for the devices. Refer to the Best Practices for Installation and Setup of Crestron RF Products, Doc. #6689 for complete system design guidelines, or contact Crestron True Blue Support for further assistance.
- 2. Item(s) sold separately.
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/