![Crestron Electronics, Inc. - FT2A-CBLR-1T-HD](https://cdn-images.av-iq.com/products/enlarge/FT2A-CBLR-1T-HD.jpeg)
One-touch Cable Retractor for FT2 ELEC Series, HDMI to HDMI, 10.2Gbps
Model: FT2A-CBLR-1T-HD
- Convenient and refined connectivity for FT2 ELEC Series FlipTops™
- Electrically clutched, spring powered retraction mechanism
- Cable pulls out smoothly to any length up to 5ft (1.5m)
- Cable retracts gracefully with the press of a button
- Control system integration enables remote retraction control
Provides a retractable cable management solution for Crestron® FT2 ELEC Series FlipTops™. Features an electrically clutched, spring powered retraction mechanism, which allows each cable to be pulled out smoothly for use, and then retracted with the touch of a button. Ideal for applications with limited space beneath the table.
Overview:
Crestron® One-Touch Cable Retractors (FT2A-CBLR-1T Series) offer a refined cable management solution for use with Crestron FT2 ELEC Series FlipTops™. Each cable pulls out smoothly to any length up to 5ft (1.5m) and retracts gently back into the FlipTop™ with the touch of a button. The button on each module is backlit for visibility in a darkened room and is labeled with an international symbol icon indicating the connection type.
Start meetings with a clean conference table. Automate one-touch retractors by connecting all the retractors in a FlipTop to a control system and a switch, or to a DMPS via a single Cresnet cable. Custom programming can trigger all the retractors to "clean up the table" after five minutes of no video being detected.
An electrically clutched, spring powered retraction mechanism allows for a compact design that is ideal for applications where vertical clearance is limited beneath the table.
Each One-Touch Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A cable tail is provided below the table for connection to a DM® transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use.
The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 11-5/8inches (295mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 8-9/16inches (218mm) horizontal clearance to either side of the chassis.
- Convenient and refined connectivity for FT2 ELEC Series FlipTops™
- Electrically clutched, spring powered retraction mechanism
- Cable pulls out smoothly to any length up to 5ft (1.5m)
- Cable retracts gracefully with the press of a button
- Control system integration enables remote retraction control
- Highly flexible, low friction flat cable construction
- Robust soft-feel sculpted connectors for easy handling
- Durable construction for years of reliable use
- Backlit international symbol icon identifies the connector type
- Active 4K models support 4K60 4:4:4 digital AV signals
- Support for HDR and HDCP 2.2
- 4K models available for HDMI® and DisplayPort devices
- Additional 4K models available to convert from DisplayPort to HDMI, Mini DisplayPort to DisplayPort, Mini DisplayPort to HDMI, and USB-C™ to HDMI
- Passive models available for VGA, stereo audio, LAN, and USB 3.0
- Requires two module spaces at either end of a FlipTop module row
- Optional mid-row installation using additional brackets
- Retractor housing snaps onto the side of the FlipTop chassis beneath the table
- Requires only 11-5/8inches (295mm) vertical clearance below the table top surface
- Provides a 2 or 4ft (0.6 or 1.2m) long tail below the table
- Cable Management Type - Other
- Spec Sheet available - Yes
- Cable:
•Pull-Out Length: Up to 5ft (1.5m) above table
•Back End Tail Length: 4ft (1.2m) beneath table except for models FT2A-CBLR-1T-4K-DP-HD, FT2A-CBLR-1T-4K-MDP-HD, and FT2A-CBLR-1T-4K-USBC-HD, which are 2ft (0.6m) - Button and Indicator:
•Retract: (1) Pushbutton with blue LED backlit symbol icon indicating the cable connector type, button actuates retraction, LED illuminates constantly or blinks if cable cannot be retracted due to interfering tension or obstruction - COMMUNICATIONS:
•Cresnet®: Allows connection to a control system via the Cresnet port on the FlipTop, supports remote actuation of the retraction function - Environmental:
•Temperature: 32° to 113° F (0° to 45° C)
•Humidity: 10% to 90% RH (non-condensing) - Construction:
•Pass-Through Module: Precision fit plastic drop-in module, 2-space, black
•Retractor Enclosure: Plastic, black
•End Mounting: Module requires two consecutive module spaces at the left or right end of any module row within the FlipTop chassis
•Enclosure attaches beneath the table to mounting slots on the left or right side of the FlipTop chassis
•Requires 11.6inches (295mm) minimum vertical clearance beneath the top surface of the table
•Projects 8.4inches (213mm) from the side of the FlipTop chassis beneath the table, and requires an additional 0.2inch or 5mm for installation
•Mid-Row Mounting: Requires an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately)
•Module requires two consecutive module spaces in the middle of any module row within the FlipTop chassis (refer to the relevant FT2A-CBLR-BRKT model spec sheet for additional details)
•Enclosure attaches beneath the table to mounting slots on the front or rear of the FlipTop chassis (via the bracket)
•Requires 11.6inches (295mm) minimum vertical clearance beneath the top surface of the table
•Projects 8.8inches (223mm) from the front or rear of the FlipTop chassis beneath the table, and requires an additional 0.2 inch or 5mm for installation - Depth: 2.24 in
- Height: 8.95 in
- Width: 10.30 in
![Company logo](https://cdn-images.av-iq.com/company/203130medium.gif)
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/