8-channel 120V Dimmer Module, 2 Feeds
Series: Green Light
Model: CLX-2DIM8
Part #: 6500750
- Eight-channel dimmer module for residential and commercial lighting applications
- Installs in a Crestron® CAEN or CAEN-MLO enclosure
- Supports dimmable incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads
- Single or dual feeds - two four-channel dimmers in one module
- Rated 16A per channel, 32A total (using two 20A feeds), at 120VAC
Provides eight channels of dimming for 120 Volt residential and commercial lighting applications. Supports incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire dimmable fluorescent lighting loads. Installs in a CAEN or CAEN-MLO wall mount automation enclosure as part of a complete Crestron® centralized lighting control system.
Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
The Crestron® CLX-2DIM8 is an eight-channel, two-feed dimmer module designed for 120V lighting system applications. It installs in a CAEN or CAEN-MLO enclosure and provides control of a variety of dimmable lighting load types including incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent. Dual feed capability provides two independent four-channel dimmers in one module space. Each output channel is rated for 1920 Watts (16 Amps), with a total module rating of 3840 Watts (32 Amps) when fed from two separate 20 Amp feeds.
Forward Phase Dimming
The CLX-2DIM8 employs forward phase (leading edge) dimming to handle inductive load types like magnetic low-voltage and neon, as well as incandescent and 2-wire fluorescent.
Air-Gap Relays
An air-gap relay on each channel output allows individual circuits to be serviced without disabling the entire module.
Silent Operation
Low-maintenance convection cooling with over-sized heatsinks affords silent operation with no mechanical components to wear out.
Centralized Lighting Cabinet Installation
Crestron CLX series lighting control modules are designed to be installed in a CAEN or CAEN-MLO wall mount enclosure. Available in a variety of sizes, CAEN and CAEN-MLO enclosures provide a scalable, high-density centralized lighting control solution for any-sized residence or commercial facility. A selection of CLX module types is offered to accommodate a wide range of load types and system configurations.
- Eight-channel dimmer module for residential and commercial lighting applications
- Installs in a Crestron® CAEN or CAEN-MLO enclosure
- Supports dimmable incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads
- Single or dual feeds - two four-channel dimmers in one module
- Rated 16A per channel, 32A total (using two 20A feeds), at 120VAC
- Forward phase dimming
- Customizable dimming curves via software
- Built-in air gap relay per channel
- Convection cooled for silent operation
- Closure-activated override mode
- UL® 924 and CSA® C22.2 No. 141-15 listed for emergency lighting control
- Crestron system integration via Cresnet®
- Easy termination using a CLT-2DIM8 terminal block
- CEC Title 24 2013 compliant
- Spec Sheet available - Yes
- Width: 6.92 in (17.46 cm)
- Height: 7.59 in (18.73 cm)
- Depth: 3.43 in (7.62 cm)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage: 120 Volts
- Product Weight: 4.50 lbs
- Certifications: CE, UL, FCC
- Load Control:
•Dimmer Channels: 8
•Dimmable Load Types: Incandescent, magnetic low voltage, neon/cold cathode, 2-wire fluorescent
•Per Channel Load Rating: 16A (1920W)
•Per Group Load Rating: Group 1 (Channels 1-4): 16A (1920W), Group 2 (Channels 5-8): 16A (1920W)
•Module Total Load Rating: 32A (3840W)
•Minimum Load: 25W
•Line/Load Voltage: 120VAC, 50/60 Hz requires one or two single-phase feeds (may be same phase or split phase) - Connections:
•Via Terminal Block:
•LINE 1 - 2: (2) Screw terminals, black, line power feed inputs (per group)
•DIM 1 - 8: (8) Screw terminals, red, load outputs (per channel)
•N IN 1 - 2: (2) Screw terminals, white, line power feed neutrals (per group)
•N OUT 1 - 8: (8) Screw terminals, white, load neutrals (per channel)
•Note: Each terminal accepts one 14-10 AWG wire.
•Module Interconnect: (2) 5-pin 0.156 inch headers
•Cresnet/Override interconnect ports
•Each connects to the adjacent module using the interconnect jumper provided
•Connects to a CAEN-BLOCK (sold separately) when installed in the lowest position within the enclosure - Controls and Indicators:
•PWR: (1) Green LED, indicates line power is applied to the LINE 1 terminal
•NET: (1) Yellow LED, indicates Cresnet communication with the control system
•SETUP: (1) Pushbutton and (1) red LED, used to enter Local mode and test each channel
•1 - 8: (8) Red LEDs, each indicates the status of the corresponding channel - Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 26 BTU/hr + (4.7 BTU/hr x Load Current in A), 176 BTU/hr at maximum load - Enclosure:
•Gray metal with black heat sink, surface mount module with (2) integral mounting flanges
•Occupies 1 module space in a CAEN or CAEN-MLO enclosure
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/