![Crestron Electronics, Inc. - CLWI-DIMUNEX](https://cdn-images.av-iq.com/products/enlarge/CLWI-DIMUNEX.png)
230VAC Universal Phase In-wall Dimmer with Neutral Wire
Model: CLWI-DIMUNEX
- infiNET EX® wireless communication
- Designed for low-wattage loads, especially LEDs
- Field-replaceable, engravable buttons
- Available in anthracite or white finishes
- Stylish bargraph LED array provides real-time status feedback
The CLWI-DIMUNEX delivers Crestron® dimming control to any light in new or retrofit 230V applications. Featuring robust infiNET EX® wireless technology, the CLWI-DIMUNEX can be installed in virtually any location thanks to reliable mesh networking. Universal dimming provides automatic compatibility with both forward- and reverse-phase loads.
Field-Replaceable and Engravable Buttons
The CLWI-DIMUNEX features engravable buttons that can be swapped out in the field. Any change in room décor or functionality is easy to handle long after the dimmer or switch has been installed. Positive snap-on fittings require no tools. Configure the dimmer or switch with a large rocker or any combination of up to two adjacent half-size rockers or triple button pad. Each CLWI-DIMUNEX ships with a full assortment of blank buttons as well.
Integrated Keypad
Because the CLWI-DIMUNEX is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to six buttons, the in-wall dimmer or switch serves as a great control interface in any Crestron system. Its single-box form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room. Also available are aesthetically-matched standalone keypads that use Cresnet® or infiNET EX communications.
infiNET EX
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150ft or 46mtr indoors), ensuring that every command reaches its intended destination without disruption.
- infiNET EX® wireless communication
- Designed for low-wattage loads, especially LEDs
- Field-replaceable, engravable buttons
- Available in anthracite or white finishes
- Stylish bargraph LED array provides real-time status feedback
- Configurable for up to 6 buttons
- Screw-clamp connectors for easy installation
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage: 230 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 220 Volts
- Depth: 1.24 in
- Height: 2.80 in
- Width: 2.80 in
- Product Weight: 0.19 lbs
- Load Types: Incandescent, Tungsten-Halogen, Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, Phase Control Dimmable LED
- Maximum Load per Channel: 450 VA/Watts
- Minimum load per channel: 15 Watts
- Buttons: Configurable for 1 rocker (up/down), or any combination of up to 2 small rockers and/or 2 three-button pad; Maximum layout contains 6 buttons; Each press configurable for up to 3 discrete functions via single click, double click and hold; Programmable via control system
- Dimming Ramp Rate: 5 seconds (default), software adjustable 0.01 to 10 seconds
- Preset Fade Time: 2 seconds (default), software adjustable 0.01 to 120 seconds
- Feedback: Up to (10) White LEDs, depending on button configuration
- RF Transceiver: infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
- Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); Subject to site-specific conditions and individual device capabilities
- Gateway: Requires an infiNET EX gateway
- Live: (1) 14-12 AWG (1 x 1.5 - 2.5 mm2), screw terminal, line power input
- NEUTRAL: (1) 14-12 AWG (1 x 1.5 - 2.5 mm2), screw terminal, neutral connection
- Dimmed Live: (1) 14-12 AWG (1 x 1.5 - 2.5 mm2), screw terminal, load output
- Ground: (1) screw post, ground
- Humidity: 10 to 90 %
- Enclosure: 1-gang mountable in a 35 mm deep square or round electrical box in horizontal or vertical positioning; Requires faceplate (not included)
![Company logo](https://cdn-images.av-iq.com/company/203130medium.gif)
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/