Green Light Dimmer Expansion Module with Cresnet Communication
Model: GL-EXP-DIM-CN
Part #: 6507034
- Single-channel lighting dimmer
- Crestron® system integration via Cresnet®
- Supports dimmable LED, incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads
- Rated 16 Amps at 100-277 Volts AC
- Forward phase dimming
The Crestron Green Light® GL-EXP Series delivers a family of professional lighting control modules for Cresnet® or DALI® based lighting systems. Designed for easy installation on a wall or above a suspended ceiling, these modules offer a perfect solution for adding extra lighting zones to any system without requiring an additional lighting cabinet.
The GL-EXP-DIM-CN is a single-channel dimmer expansion module designed to control LED, incandescent, magnetic low-voltage, neon/cold cathode, or 2-wire dimmable fluorescent lighting loads. Utilizing proprietary zero-cross filter technology, the GL-EXP-DIM-CN compensates for line voltage and frequency fluctuations, providing superior immunity to power line noise and a dramatic reduction in lamp flicker.
Forward Phase Dimming
The GL-EXP-DIM-CN employs forward phase (leading edge) dimming to handle inductive load types like magnetic low-voltage and neon, as well as incandescent, LED, and 2-wire fluorescent.
Cresnet® Communications
The GL-EXP-DIM-CN interfaces with a Crestron® control system via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.
Emergency Lighting Control
The GL-EXP-DIM-CN is UL® 924 listed for use in controlling an emergency lighting load. In the event of a power failure, a contact closure from a power loss sensor (Crestron GLS-PLS-120/277, sold separately) activates the override mode in the GL-EXP-DIM-CN to turn on the lighting load if it is off (assuming line power is supplied by a backup power source). The override dimming level can be preset to any value when commissioning the lighting system, so even if the load is already on prior to a power failure, it will change to the preset level when override mode is activated.
Plenum Rated NEMA Enclosure
The GL-EXP-DIM-CN is designed to be mounted to a vertical surface and is UL 2043 compliant to allow for installation in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides of the unit. All connections are made via screw terminals behind the front cover.
- Single-channel lighting dimmer
- Crestron® system integration via Cresnet®
- Supports dimmable LED, incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads
- Rated 16 Amps at 100-277 Volts AC
- Forward phase dimming
- Zero-cross filter technology for reduced lamp flicker
- Extreme stability under noisy power line conditions
- Built-in air gap relay
- Closure-activated override mode
- UL® 924 listed for emergency lighting control
- Surface mountable NEMA Type 1 enclosure
- Mounts on a wall panel or above a suspended ceiling
- UL 2043 listed for installation in an environmental air handling space
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: FCC, CE, UL
- Current Draw: 16 Amps
- Depth: 3.16 in
- Height: 8.78 in
- Width: 6.39 in
- Product Weight: 3.43 lbs
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- Load Control:
•Dimmer Channels: 1
•Dimmable Load Types: LED, incandescent, neon/cold cathode, magnetic low-voltage, 2-wire dimmable fluorescent - Connections:
•NEUT: (3) Captive screw terminals, Neutral connections for feed and load
•24 to 10 AWG (0.25 to 4.0 mm2) wire size
•LINE: (2) Captive screw terminals, Line power input and pass-through
•24 to 10 AWG (0.25 to 4.0 mm2) wire size
•DIM: (1) Captive screw terminal, Dimmed load output
•24 to 10 AWG (0.25 to 4.0 mm2) wire size
•N/C: (1) Captive screw terminal, No connection (not used)
•OVERRIDE: (2) Captive screw terminals
•Low-voltage contact closure sensing input
•Activates override mode when a closure is sensed
•26 to 14 AWG (0.14 to 1.5 mm2) wire size for use with Class 2 wiring only
•CRESNET: (4) Captive screw terminals
•Cresnet slave port (communications only, does not use Cresnet power)
•26 to 14 AWG (0.14 to 1.5 mm2) wire size for use with Class 2 wiring only
•Ground: (1) 3-terminal grounding block - Controls and Indicators:
•PWR: (1) Green LED, indicates line power is applied to either LINE terminal
•NET: (1) Yellow LED, indicates Cresnet network communication
•ERR: (1) Red LED, indicates a variety of error conditions via blinking patterns (refer to the installation guide)
•ON/OFF: (1) Pushbutton and (1) red LED, pushbutton toggles the load output on and off (press and hold to cycle the dimming level up and down), LED indicates the load output is energized
•RESET: (1) Pushbutton, initiates hardware reset
•SW1: (1) Two-position slide switch (behind front cover), enables/disables the zero-cross detection filter (disabled by default)
•SW2 - SW4: (3) Two-position slide switches (behind front cover), not used - Construction:
•Enclosure: NEMA Type 1, galvanized steel with gray matte powder coated removable front cover panel, extruded aluminum heat sink on rear, (2) integral mounting flanges, (4) 1/2 or 3/4-inch conduit knockouts on bottom and lower left and right sides
•Mounting: Surface mount, must be oriented upright and mounted to a vertical surface with 6 inches (153 mm) minimum spacing above and below for proper ventilation and heat dissipation
Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
https://gablecompany.com/