


60W DIN Rail Cresnet Power Supply
Model: DIN-PWS60
Part #: 6507733
- 60W Cresnet® power supply module
- Powers the DIN-AP3 automation processor and other Cresnet devices
- Includes six Cresnet power ports
- Cresnet data passes through unaffected
- 6M wide DIN rail mounting
A 60 Watt, DIN rail-mounted Cresnet® power supply module with three Cresnet power ports for powering Crestron® automation processors and other Cresnet devices.
The DIN-PWS60 is a 60 Watt Cresnet® Power Supply module designed to snap onto a standard DIN rail for installation in a wall-mount enclosure. DIN rail mounting enables modular installation alongside Crestron® DIN Rail lighting and automation control modules and other third-party DIN rail-mountable devices. All wiring connections are made using screw terminals positioned along the top and bottom of the unit, which are clearly accessible from the front for easy installation and servicing. Six Cresnet power ports are provided.
- 60W Cresnet® power supply module
- Powers the DIN-AP3 automation processor and other Cresnet devices
- Includes six Cresnet power ports
- Cresnet data passes through unaffected
- 6M wide DIN rail mounting
- 100-277 Volt AC line powered
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 70 Watt
- Current Draw: 2 Amps
- Depth: 2.29 in
- Height: 3.70 in
- Width: 4.25 in
- Product Weight: 0.37 lbs
- DC Voltage: 24 Volts
- Output:
•Output Rating: 60W (2.5A) at 24VDC, regulated, limited power source
•Ripple/Noise: <1%
•Efficiency: 85% - Input Current:
•1.1 Amps at 120VAC
•0.65 Amps at 230VAC
•0.57 Amps at 277VAC
•Measured at full rated output - Connections:
•100-277VAC 50/60Hz: (1) Set of (3) captive screw terminals
•Line power input and ground
•Maximum Wire Size: 12AWG (2.5mm²)
•Net: (6) 4-pin 3.5 mm detachable terminal blocks, paralleled
•Cresnet power output ports with data pass-through
•Maximum Wire Size: 14AWG (1.5mm²)
•Fuse: (1) DC output fuse, T3.15AH
•5x20mm, 250V, 3.15A, time-lag, ceramic cartridge - Indicators:
•24VDC: (1) Green LED, indicates 24VDC output at all NET ports
•Note: Remains lit when fuse is blown - Enclosure:
•Light gray polycarbonate housing with polycarbonate label overlay, UL 94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm) - Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 26 BTU/hr

Gable
7440 Fort Smallwood Rd
Baltimore, MD 21226
USA
(410) 255-6400
www.gablecompany.com